Sony XDCAM PDW-HD1500, Руководство по обслуживанию

Страница: 134 / 160

PDW-HD1500/V1 (E)
7-6
7-5. Clearing Media Log
n
This menu is used to clear acquired media log.
Once this menu is executed, the cleared log data can no
longer be restored.
1. Select “OTHERS” with the
[(]
/
[)]
button, and press
the
[*]
button.
2. Select “CLEAR MEDIA LOG” with the
[(]
/
[)]
button, and press the
[*]
button.
3. A confirmation screen appears waiting for entry of the
[SET]
button.
4. Press the
[PUSH|SET]
knob.
The result appears.
5. Perform the procedure after adjustment.
(Refer to Section 7-6.)
If failed:
The following message is displayed on the screen.
The EEPROM (IC4/SE-850 board) may be defective.
7-6. After Adjustment
1. Turn off the power.
2. Attach the top panel. (Refer to Section 1-4-1.)
7-4. Servo2 Automatic Adjustment
n
This adjustment is not available when the loader assembly
is removed. Be sure to install the loader assembly before
making this adjustment.
1. Clean the loader assembly. (Refer to Section 5-2-2.)
2. Install the loader assembly. (Refer to Section 6-3.)
3. Display the adjustment item referring to Section 7-1-3.
4. Select “SERVO_2” with the
[(]
/
[)]
button, and press
the
[*]
button.
5. Select “OP-0” or “OP-1” with the
[(]
/
[)]
button, and
press the
[*]
button.
6. A confirmation screen appears waiting for entry of the
[SET]
button.
7. Press the
[PUSH|SET]
knob.
A confirmation screen appears.
8. Set the alignment disc.
The result appears.
9. “COMPLETED” appears on the screen, and the
ADJUST screen appears.
10. If necessary, adjust the other OP in the same way.
11. Press the
[&]
button to display the drive maintenance
menu.
12. Clear the media log. (Refer to Section 7-5.)
SERVO_2
OP-0
ADJUST START?
OK: SET KEY
EXIT: MENU KEY
SERVO_2
OP-0
INSERT ALIGNMENT DISC
PFD23A-RS.
EXIT: MENU KEY
SERVO_2
OP-0
ADJUSTING...COMPLETED
EXIT: MENU KEY
CLEAR MEDIA LOG
ARE YOU SURE?
OK: SET KEY
EXIT: MENU KEY
CLEAR MEDIA LOG
EXECUTING...COMPLETED
EXIT: MENU KEY
CLEAR MEDIA LOG
EXECUTING...FAILED
EXIT: MENU KEY