Sony XDCAM PDW-HD1500, Руководство по обслуживанию

Страница: 54 / 160

3-8
PDW-HD1500/V1 (E)
Item Setting Default Function
Hostname Charactor PDW-HD1500 Sets a host name
Serial No.
Domain Charactor — Sets a domain name
IP Address xxx.xxx.xxx.xxx 192.168.1.10 Sets an IP address (See below)
Subnet Mask xxx.xxx.xxx.xxx 255.255.255.0 Sets a subnet mask (See below)
Default Gateway xxx.xxx.xxx.xxx 0.0.0.0 Sets a default gateway (See below)
DNS 1 xxx.xxx.xxx.xxx — Sets a DNS server 1
DNS 2 xxx.xxx.xxx.xxx — Sets a DNS server 2
DHCP Enable/Disable Disable Sets whether to automatically acquire an IP address on
the DHCP server
Enable: Enables automatic acquisition. If the server does not
respond in 30 seconds, the IP address is set by Auto IP
Disable:Disables automatic acquisition
MAC Address Display only — Displays a MAC address
Link Speed AUTO/10Mbps/100Mbps/1000Mbps Auto Sets a communication speed
Duplex AUTO/Full Duplex/ Auto Sets a communication mode
Half Duplex Auto
Full duplex
Half duplex
UPnP Enable/Disable Disable Sets whether to use a UPnP
Enable : Use
Disable : Not use
Jumbo Frame Off/4088/9014 Off Sets a maximum frame size of Ethernet *
1
(FCS *
2
is not included)
Off: 1514 byte (Factory setting)
4088: 4088 byte
9014: 9014 byte
n
.
Valid only when Link Speed is set to 1000Mbps.
All related device on the network need to support it
.
When Link Speed is set to 10Mbps or 100Mbps, set to 4088
or 9014, the transmission speed becomes slow or the network
connection is fail, depending on the network device
*
1: Ethernet is a registered trademark of Xerox Corporation.
*
2: Frame Check Sequence
Procedure
1. Enter the IP address (or the subnet mask or the default gateway).
(Pressing “Reset” clears the Input window.)
2. Press “Execute” to change the setting.