Sony XDCAM PDW-HD1500, Руководство по обслуживанию

Страница: 96 / 160

5-2
PDW-HD1500/V1 (E)
Display contents
Menu No. Menu Display Item Contents
H11 OPE HOURS Operation hours Total operation hours (Resettable)
H12 LASER0 Laser parameter 0 Total output hours of laser on optical block assembly (OP0) (Resettable)
H13 SEEK HOURS0 Seek running 0 Total running hours of seek on optical block assembly (OP0) (Resettable)
H14 SPDL HOURS Spindle running Total running hours of spindle motor (Resettable)
H15 LOAD COUNT Loading counter Total loading counts of disc (Resettable)
H16 LASER1 Laser parameter 1 Total output hours of laser on optical block assembly (OP1) (Resettable)
H17 SEEK HOURS1 Seek running 1 Total running hours of seek on optical block assembly (OP1) (Resettable)
How to exit form the hours meter
Press the
[MENU]
button or EXIT (F6) button.
5-1-3. Periodic Check/Replacement Parts List
This table does not describe the guarantee period of each part.
The replacement period of each part is changed according to the environment and condition.
No. Part to Be Replaced Hours Meter (Menu item) Check/Replacement Period Parts Number and Name Section
1 Optical block assembly Laser parameter Replace every 6000.
!
8-820-389-02 6-8
(LASER PARAMETER) KES-330A/J1RP
2 Seek motor Seek running hours Replace every 12000 H. A-1374-689-A 6-9
(SEEK RUNNING) Seek motor assembly
3 Cleaner assembly Laser parameter Check every 6000. A-1541-288-A 6-4
(LASER PARAMETER) Replace when bristles of brush Cleaner (P200) assembly
become sparse or damaged
remarkably.
4 EM-6 board Laser parameter Replace around the same time A-1201-481-A 6-12-14
(LASER PARAMETER) as optical block assembly. EM-5S board
5 Lithium battery Current-carrying hours About 10 years
!
1-767-156-11 1-9
(for NVRAM) (OPERATION) M4T28-BR12SH1
6 Loader assembly Disc loading count * Replace every 110,000 times. A-1541-722-A 6-3
(LOADING) Loader (P200) assembly (RP)
*
: This count differs from the actual disc insertion times because the loader up/down count is made by the normal loading operation.
5-1-2. Digital Hours Meter
The elapsed operation time or count of the unit is displayed.
Use this digital hours meter as a guide to periodic check/replacement.
Displaying Digital Hours Meter
1. Display the setup menu with the
[MENU]
button.
2. Select “HOURS METER” with rotate the
[PUSH|SET]
knob or the
[(]
/
[)]
button, and press the
[PUSH|SET]
knob or SELECT (F2) button.