Sony XDCAM PDW-HD1500, Руководство по обслуживанию

Страница: 28 / 160

1-20
PDW-HD1500/V1 (E)
Name Board CPU ROM
TSYS ENC-107 IC201, IC401, IC601 IC2905, IC2906
TMBP IC801, IC1001 (HPR-23)
HDRX RX-93 IC300 IC103
KY KY-624 U1 U5
KYIC
MENU HPR-23 IC2601 IC2905, IC2906
FTBL
TS TSI-60 IC200 IC202
(Option) IC500 IC503, IC504
TSIC
(Option)
1-11. Internal Video Test Signal
This unit has the internal video test signal generator.
The test signals output from the video test signal generator
can be recorded.
Perform the following steps to output the test signals.
1. Display MAINTENANCE MENU.
(Refer to the Operation Manual.)
2. Select “M0: CHECK” with the
[(]
/
[)]
button, and
press the
[*]
button.
3. Select “C2: AUDIO/VIDEO” with the
[(]
/
[)]
button,
and press the
[*]
button.
4. “C21: VIDEO TSG” is selected. Press the
[*]
button.
5. Select the test signal to be output using the
[(]
/
[)]
buttons, and press the
[SET]
button.
75% COLOR BARS: 75% color-bar signal
BLACK: black signal
Describes output waveform figures of this generator in the
next page.
9. When a package file that can be updated is found, the
screen changes to the following display. Press the
[SET]
button.
10. The update is executed, and the firmware name
currently updated and the elapsed time are displayed.
n
Never disconnect the USB memory during the update.
11. The update is complete, and the message “COM-
PLETE” appears.
12. Turn the power OFF, and then turn it back ON.
13. Execute RESET ALL SETUP of the MAINTE-
NANCE MENU. (Refer to the Operation Manual.)
Updates the following softwares.
Name Board CPU ROM
SY1 HPR-23 IC2601 IC2905, IC2906
SY2K NET-4 IC1 IC907, IC908
SY2U
DRV DR-601 IC600 IC602
PIER HPR-23 IC2103 IC2905, IC2906
PHOT HPR-23 IC801 IC2905, IC2906
VAX HPR-23 IC206 IC2905, IC2906
LVIS HPR-23 IC501 IC2905, IC2906
FAM HPR-23 IC1201 IC2905, IC2906
LUNA VPR-99 IC100 IC2905, IC2906
(HPR-23)
DSP0 HPR-23 IC1701, IC1702 IC2905, IC2906
DSP1 HPR-23 IC1801, IC1802 IC2905, IC2906
DSP2 HPR-23 IC1901 IC2905, IC2906
PRXA HPR-23 IC2001, IC2002 IC2905, IC2906
(Continued)
M3E : USB MEMORY UTIL
M3E4 : PACKAGE UPDATE
CURRENT NEW
VERSION VERSION
1.00 --> 1.10
UPDATE OK?
CANCEL : F1 (RETURN)
EXECUTE : F5 (SET)
M3E : USB MEMORY UTIL
M3E4 : PACKAGE UPDATE
CURRENT NEW
VERSION VERSION
1.00 --> 1.10
UPDATING : SY1
Total time : 00:00