Sony XDCAM PDW-HD1500, Руководство по обслуживанию

Страница: 56 / 160

3-10
PDW-HD1500/V1 (E)
Procedure
1. Set the Community Name.
Set the community name of SNMP Agent installed in XDCAM.
n
To perform communication with SNMP, the community name set in the SNMP manager should
correspond to the one set in XDCAM.
2. Set the target hosts for the communication (Communication Hosts).
3. Set the target hosts to which to send the trap (Trap Hosts).
n
When you use SONY-PRO-MIB, select “specific” and then specify SNMP manager's IP address.
4. Set the Authentication Trap.
5. Save the setting by pressing “Execute”.
Check that “OK” or “OK : Reboot the machine” is displayed in the Status field.
n
The setting is enabled after the power is turned on again.
To disable the setting, press “Reset”.
SNMP Specification
The specifications of the stored SNMP Agent are shown below.
SNMP Version SNMPv1
MIB definition SMIv2
Support PDU GetRequest, GetNextRequest, SetRequest, GetResponce, Trap
Standard MIB MIB-2
Extended MIB SONY-PRO-MIB, SONY-XDCAM1-MIB
System Configuration Examples
The system configuration examples and the corresponding settings are shown.
Community Name
Read-only Community : public
Read-Write Community : private
Trap Community : public
Communication Hosts : “specific”
IP Address 1 : 192.168.0.1
IP Address 2 : 192.168.0.2
Trap Hosts : “specific”
IP Address 1 : 192.168.0.1
IP Address 2 : 192.168.0.2
IP Address 3 : 192.168.0.3
Authentication Trap : “on”
192.168.0.5
Agent-2
192.168.0.6
Agent-3
192.168.0.3
Manager-3
Trap
Community : public
Monitoring System Trap
Receiving System Monitored System
Read Community : public
Write Community : private
Trap Community : public
192.168.0.2
Manager-2
192.168.0.1
Manager-1
192.168.0.4
Agent-1