Sony XDCAM PDW-HD1500, Руководство по обслуживанию

Страница: 118 / 160

6-20
PDW-HD1500/V1 (E)
6-12. Removing/Reattaching
Mounted Circuit Boards
6-12-1. AU-311 Board
Removal
1. Remove the top panel assembly.
(Refer to Section 1-4-1.)
2. Remove the rear panel.
(Refer to Section 1-4-3.)
3. Pull out the AU-311 board in the arrow
direction as follows:
Insert tip of Phillips head screwdrivers into
cut-outs at the right end and left end of the
board to push the AU-311 board out of slot.
4. Disconnect the harness from the connector
CN800.
5. Remove the three screws to detach the fan
motor bracket (AU), the fan spacer, the fan
motor (AU) and the AU-311 board.
Reinstallation
1. Reinstall the removed parts by reversing
steps 1 to 4 above.
n
When installing the fan motor (AU), install it
with its label side facing rear as shown in the
figure.
Rear side
of unit
AU-311 board
PS3
x
40
Fan motor
(AU)
Fan bracket
(AU)
PSW2.6
x
6
Fan spacer
CN800
Label side