Sony XDCAM PDW-HD1500, Руководство по обслуживанию

Страница: 40 / 160

2-4
PDW-HD1500/V1 (E)
(Continued)
Main Sub Time data Maintenance Drive Description
code code display logger logger
06 049
←
O O
OP (OP0) SA actuator cannot move to the target position.
0C9
←
O O
OP (OP1) SA actuator cannot move to the target position.
E41
← O O
OP (OP0) SA actuator home position cannot be detected during startup
adjustment.
EC1
←
O O
OP (OP1) SA actuator home position cannot be detected during startup
adjustment.
F41 ←
O O
OP (OP0) SA actuator home position cannot be detected during power-on
initialization.
FC1
← O O
OP (OP1) SA actuator home position cannot be detected during power-on
initialization.
08 091
←
O O
Spindle motor does not rotate after the predetermined time has passed
(or no FG signal is detected).
095 ←
O O
Spindle motor cannot be stopped (or abnormal FG signal is detected).
292
← O O
Spindle motor rotation is detected during vertical move of loading. *
992
←
O O
Spindle motor rotation is detected during vertical move of unloading. *
*
: The vertical move of loading/unloading is also carried out by STBY ON/OFF.
n
Any number of the following is applicable for “X” in the sub codes above, showing an operation status
where the error is detected.
Example) 527: Laser current of optical block assembly is abnormal (zero or excessive) “reading”.
0: Operation cannot be identified or no need to be identified.
1: During loading
2: During vertical move of loading
3: Disc is not rotating
4: Seeking
5: Reading
6: Writing
7: Standby state
8: Ejecting
9: Unchucking
A: During disc removal
B: During lens cleaning or device checking
C, D: (Not used)
E:
During startup adjustment of optical block assembly
F: During power-on initialization of optical block assembly