Sony XDCAM PDW-HD1500, Руководство по обслуживанию

Страница: 133 / 160

PDW-HD1500/V1 (E)
7-5
21. The tangential skew adjustment result appears.
When “OK” appears, press the
[MENU]
button to
make radial skew adjustment. (Refer to Section 7-3-2.)
When “ERROR” appears, press the
[MENU]
button to
make adjustment from step 6.
22. If necessary, adjust the other OP in the same way.
7-3-2. Radial Skew Adjustment
1. Select “RAD ADJUST” with the
[(]
/
[)]
button, and
press the
[*]
button.
2. A confirmation screen appears waiting for entry of the
[SET]
button.
3. Press the
[PUSH|SET]
knob.
The result appears.
4. When “COMPLETED” appears, press the
[MENU]
button.
5. Press the
[&]
button.
The ADJUST screen appears.
6. Adjust the OP1 in the same way.
7. Press the
[&]
button twice.
8. Remove the cartridge and the weight.
9. Apply locking compound to the screw shown in the
figure.
n
Apply the locking compound to the screw as shown in
the figure, being careful not to put it over the head of
the screw.
10. Perform the servo2 automatic adjustment.
(Refer to Section 7-4.)
RAD ADJUST
OP-0
ADJUST START?
OK: SET KEY
EXIT: MENU KEY
RAD ADJUST
OP-0
ADJUSTING...OK
EXIT: MENU KEY
DRIVE MAINTENANCE
ADJUST OP-0
SKEW
TAN ADJUST
RAD ADJUST
TAN ADJUST
OP-0
CHECKING...OK
EXIT: MENU KEY
Tangential IN/OUT
adjustment screw
Locking compound