1-36
HDW-750/750CE V1
1-15-3. Extending the DCP Board Assembly
Required tool : DCP-DVP extension assembly
m
.
Life of flexible card wire will be significantly shortened if it
is folded. Be very careful not to fold the flexible card wire.
.
Do not bend the coaxial cable strongly or do not damage
the coaxial cable by hooking it on the frame.
1.
Open the inside panel assembly.
(Refer to Section 1-5.)
2.
Remove the DCP board assembly. (Refer to Section 1-7-1.)
3.
Connect the connector (CN1) of the DCP-DVP
extension assembly to the connector (CN104) on the
MB-898 board.
4.
Connect the removed DCP board assembly to the
connector (CN2) of the DCP-DVP extension assembly.
5.
Connect the harness, coaxial cable and flexible card
wire of the connectors (CN1, CN3, CN4, CN105) that
are removed in step 2 to the connectors (CN3, CN5,
CN7, CN11) on the DCP-DVP extension assembly.
6.
Connect the harness and flexible card wire of the
DCP-DVP extension assembly to the connectors
(CN3, CN4, CN105) on the DCP board assembly.
7.
Connect CN12 on the DCP-DVP extension assembly
to CN1 on the DC-110/110A board with the coaxial
cable supplied with the DCP-DVP extension assembly.
DCP-DVP
extension
assembly
DCP board assembly
CN1
CN2
CN104
MB-898 board
DCP board assembly
DC-110/110A board
DCP-DVP
extension
assembly
CN3
CN1
CN11
CN12
CN5
CN7
CN3
CN4
CN105
Coaxial cable
Coaxial cable
Flexible
card wire
CN8
CN4
CN6
1-15. How to Extend the Circuit Board