12
HDW-750/750CE V1
Contents
The following is a summary of the sections of this manual.
Section 1
Service Overview
Describes the location of major parts, on-board switches, tools, fixtures, measuring
equipment, adjustments/setups after board replace, etc.
Section 2
Periodic Maintenance and Inspection
Describes the cleaning method of various parts, periodic inspection list, etc.
Section 3
Error Diagnostics
Describes the error codes, error messages, etc.
Section 4
Setup Menu
Describes the setup menu, etc.
Section 5
File System
Describes the file structure, etc.
Section 6
Parts Replacement
Describes the replacement procedure of circuit board, CCD unit, connectors,
switches and others.
Section 7
Part Replacement of Mechanical Deck Assembly
Describes the replacement procedure of the parts on the mechanical deck assembly.
Section 8
Mechanical Adjustment
Describes the tape run adjustments and others that are necessitated after replacement
of mechanical parts as described in section 7.
Section 9
Electrical Alignment of Camera System
Describes the camera system electrical alignment for general camera maintenance
and adjustment after replacement of parts.
Section 10 Electrical Alignment of VTR System
Describes the VTR system electrical alignment for general VTR maintenance and
adjustment after replacement of parts as described in sections 6 and 7.
Section 11 VTR Maintenance Mode
Describes the VTR maintenance mode that is required during VTR maintenance and
error diagnosis.
