Sony HDCAM HDW-730, Руководство по обслуживанию

Страница: 159 / 544

4-37
HDW-750/750CE V1
LEVEL ADJ Display (Adjusting output signal level)
Item Setting Function
Y LEVEL ( _ 99 to 99) Adjust the Y signal output level.
SYNC LEVEL ( _ 99 to 99) Adjust the sync signal output level.
Pr LEVEL ( _ 99 to 99) Adjust the Pr signal output level.
Pb LEVEL (
_
99 to 99) Adjust the Pb signal output level.
OUTPUT SELECT Y/R/G/B/RGB * 1 Selects the video signal that is output from the TEST
OUT and the VBS/SDI OUT terminal.
(The Y-signal becomes the VBS signal when the
REAR BNC OUT SEL of the OUTPUT SEL display (of
the OPERATION menu) selects the VBS position and
when the TEST OUT SELECT chooses the SD
position.) The output signal returns to the Y-signal
without fail at power-on.
* 1 : RGB can be selected only when the Camcorder is used in the service mode.
SD LEVEL ADJ Display (Adjusting the down converter (SD OUT) output level)
n
This function is enabled only when the down-converter board DC-110/110A is installed.
(The Camcorders having the serial numbers other than No. 70000 and No. 80000 series, require an option-
al HKDW-702.)
Item Setting Function
SD VBS LEVEL ( _ 99 to 99) Adjusts the VBS signal output level.
SD VBS SETUP LVL 0%/7.5% Selects the setup level.
(HDW-750 and 0% : Normal
HDW-730 (59.94i)) 7.5% :When an additional setup is required.
SD VF Y LEVEL (
_
99 to 99) Adjusts the VF Y signal output level.
SD VF R-Y LEVEL ( _ 99 to 99) Adjusts the VF R-Y signal output level.
SD VF B-Y LEVEL ( _ 99 to 99) Adjusts the VF B-Y signal output level.
? 03
O
LEVEL ADJ
Y LEVEL : 0
SYNC LEVEL : 0
Pr LEVEL : 0
Pb LEVEL : 0
OUTPUT SELECT : Y
? 04 O SD LEVEL ADJ
SD VBS LEVEL : 0
SD VBS SETUP LVL: 0%
SD VF Y LEVEL : 0
SD VF R-Y LEVEL : 0
SD VF B-Y LEVEL : 0
HDW-750 and HDW-730 (59.94i)
4-6. MAINTENANCE Menu