Installing
the Security System
67
RB6741-Z Touchscreen Security System Installation Manual
Configuring the Touchscreen
If necessary, perform the following operations:
Modify
the Entry and Exit delay time periods (see “Configuring Entry/Exit Delay Periods”
page 88).
Modify the alarm transmission delay (see “Configuring the Alarm Transmission Delay” on
page 90).
Modify the “swinger shutdown” (see “Configuring the Swinger Shutdown Feature” on
page 91).
Reset the Touchscreen to factory defaults (se
e “Resetting the Touchscreen to Factory
Defaults
” on page 92). This causes the device to require activation again, which requires
the customer’s account to be reset.
Check for a new firmware update (see “Checking for New Firmware Updates for the
Touchscreen
” on page 93).
Manage the sensors/security zones (see “Managing Sensors and Zones” on page 96).
Manage the ca
meras (see “Managing Cameras” on page 114).
Manage key fobs and key pads
(see “Managing Key Fobs” on page 136 and “Managing
Key Pads
” on page 143).
Manage lights and thermostats (see “Managing Lights” on page 130 and “Managing
Thermostats
” on page 123).
Technicians can also perform the following general activities that are also available to the
customer, which are described in the
RB6741-Z Touchscreen Security System User Manual
.
Manage the way sensors are listed in Touchscreen reports and tools
View and test the Touchscreen’s connectivity to the central-monitoring stations
(described on page 85)
Manage the key pad codes and secret word
View the customer’s account information
Manage your Touchscreen device sounds, screensaver, and so on
View technical information about the Touchscreen device
