Using the Key
Fob
188
RB6741-Z Touchscreen Security System Installation Manual
Arming the System
From the key pad, you can arm your system in Arm Away mode or Arm Stay. Arm Night
mode must be performed from the Touchscreen or Subscriber Portal.
Arm Away Mode
Press the
button for 1.5 seconds to arm the system in Arm Away mode (no one still in
the premises). For an explanation about this arming mode, refer to the
RB6741-Z
Touchscreen Security System User Manual
.
The LED flashes red once to indicate that it has contacted the system then lights red for one
second. The Exit Delay starts (default 30 seconds
—Touchscreen beeps during this period).
Arm Stay
Press the
button for 1.5 seconds to arm the system in Arm Stay mode (there are still
people within the premises). For an explanation about this arming mode, refer to the
RB6741-Z Touchscreen Security System User Manual
.
The LED flashes red once to indicate that it has contacted the system then lights red for one
second. The Exit Delay starts
—twice as long as the period configured for Arm Away (up to
120 seconds with no beeping from the Touchscreen).
Disarming the System
Before entering the premises in Armed state, press the
button for 1.5 seconds to disarm
the system without entering the premises.
The LED flashes green once to show it has contacted the system, then lights green for 1
second. The system disarms. There is no Entry Delay. Contact persons receive an email
and SMS notifications if the system is configured to send these alerts.
The LED flashes red once to show it has contacted the system, then flashes red 7 times.
Sending an Emergency Police Alarm
Press and hold the
button for 2.25 seconds to send a silent alarm to central monitoring
for police assistance. The LED flashes orange to indicate that the alarm has been sent. The
