Key Pad Installation
184
RB6741-Z Touchscreen Security System Installation Manual
Arming the System
From the key pad, you can arm your system in Arm Away mode or Arm Stay. Arm Night
mode must be performed from the Touchscreen or Subscriber Portal.
Arm Away Mode
Enter a valid keypad code followed by the
button to arm the system in Arm Away mode
(no one still in the premises). For an explanation about this arming mode, refer to the
RB6741-Z Touchscreen Security System User Manual
.
The
button turns red for 3 seconds to indicate that the Exit Delay has started (default 30
seconds
—Touchscreen beeps during this period). If the system is not ready (because, for
example, a door or window is open) the button flashes orange seven times.
Arm Stay
Enter a valid keypad code followed by the
button to arm the system in Arm Stay mode
(there are still people within the premises). For an explanation about this arming mode, refer
to the
RB6741-Z Touchscreen Security System User Manual
.
The
button turns red for 3 seconds to indicate that the Exit Delay has started (twice as
long as the period configured for Arm Away
—up to 120 seconds with no beeping from the
Touchscreen). If the system is not ready (because, for example, a door or window is open)
the button flashes orange seven times.
Disarming the System
Enter a valid keypad code followed by the
button to disarm the system.
The
button turns green for 3 seconds to indicate that the system has been disarmed.
There is no Entry Delay period.
Sending an Emergency Police Alarm
Press and hold this button for about 2 seconds to send a silent alarm to central monitoring
for police assistance. This Disarm works the same as though you performed this operation
from the Touchscreen.
