Mounting
Instruction Manual ScrubberGuard
14830E/2
27
Installation is made as follows:
WORKSTEP
ADDITIONAL INFO / IMAGES
1.
Set up the system in the desired position and
weld to the floor on the adapter panels (X).
Alternatively, the system can also be
screwed onto the floor directly without using
the adapter panels.
2.
Remove the transport locks on the Scrub-
berGuard (arrows).
3.
Attach the sample connections according to
Section 4.3.2.
A: Sample inlet
B: Sample outlet
Shut-off valves must be present at the
customer at the sampling point and sample
return point.
4.
Install the optional accessories according to
Section 4.4.
