Instruction Manual ScrubberGuard
Servicing
74
14830E/2
WORKSTEP
ADDITIONAL INFO / IMAGES
6.
Remove the perforated plate from the water
tank and clean it.
7.
Clean the water tank, fill with fresh water and
then drain it again by pressing the
Drain tank
button.
The pump may only be operated dry for
a maximum of 30 seconds. Danger of over-
heating!
Solid matter larger than
3 mm must not be pumped.
8.
Reattach the perforated plate. In doing so, en-
sure that the angled part (X) is facing up-
wards.
9.
Reinsert the float switch.