Siemens SINUMERIK 828D Turning, Руководство по эксплуатации функций

Страница: 631 / 1799

K1: Mode group, channel, program operation, reset response
9.14 System settings for power-up, RESET/part-program end
Basic Functions
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
631
MD20152 $MC_GCODE_RESET_MODE
Each G code group controlled in MD20150 $MC_GCODE_RESET_VALUES[i] can be selectively controlled with
MD20152 $MC_GCODE_RESET_MODE[i].
Part program start
The initial setting of the control system at part program start, e.g. G codes (especially active plane and active
settable zero offset), active tool length compensation, transformation, and axis coupling, is determined using
machine data:
MD20112 $MC_START_MODE_MASK (definition of the basic setting of the control after part program start)
Bit assignment, see:
References:
Detailed machine-data description
Application
If a bit is set in MD20112 $MC_START_MODE_MASK, the reset action of the relevant function can be delayed
until the start of the parts program.
Significance of the machine data
The channel­specific machine data in the table "Selection of RESET and power-up response" has the following
significance:
MD20152 $MC_GCODE_RESET_MODE[i]
(i = G code group -1)
0 1
MD20150 $MC_GCODE_RESET_VALUES[i] The value stored in
MD20150 is active
The last active/
current value is active
Note
In MD20110 bits set to 1 cause settings to be retained,
in MD20112 bits set to 0 cause settings to be retained.
Machine data Meaning
MD20120 $MC_TOOL_RESET_VALUE Tool length compensation on power-up
Definition of the tool (T No.) whose tool length compensation
values must be considered during RESET and power-up
according to MD20110 $MC_RESET_MODE_MASK
MD20121 $MC_TOOL_PRESEL_RESET_VALUE Preselected tool on RESET
Definition of the tool (T-No.) as a preselected tool whose tool
length compensation values must be considered during
RESET and power-up according to
MD20110 $MC_RESET_MODE_MASK
MD20130 $MC_CUTTING_EDGE_RESET_VALUE Tool cutting-edge length compensation on power-up
Definition of the cutting-edge number (D number) of the tool in
MD20120 $MC_TOOL_RESET_VALUE
MD20140 $MC_TRAFO_RESET_VALUE Power-up transformation data block
Definition of the transformation data block (TRAORI,
TRAANG, TRANSMIT)