Siemens SINUMERIK 808D, Руководство по диагностике

Страница: 81 / 566

- _N_NC_NPA - System internal: data to describe 3D protection zones, NCK-specific
- _N_NC_TRA - System internal: transformation data sets, NCK-specific
- _N_NC_WAL - System internal: data to describe coordinate-specific working area limitation
- _N_COMPLETE_CYD - System internal: cycle and display machine data, NCK-, channel-, axis-specific
c = Channel number
a = Machine axis number
t = TOA unit number
There are also other internal system data blocks with identifiers.
Reaction: NC not ready.
Channel not ready.
NC Start disable in this channel.
Interface signals are set.
Alarm display.
NC Stop on alarm.
Remedy: Correct the machine data or undo the changes made.
Please inform the authorized personnel/service department. There are two determining machine data for cycle programs:
- MD18170 $MN_MM_NUM_MAX_FUNC_NAMES = max. number of all cycle programs, error number = 2 shows that this
value is too small.
- MD18180 $MN_MM_NUM_MAX_FUNC_PARAM = max. number of all parameters defined in the cycle programs, error
number = 2 shows that this value is too small
(If these MDs are modified, the memory backup is retained)
The following applies to macro definitions:
MD18160 $MN_MM_NUM_USER_MACROS = max. number of all macro definitions, error number = 2 shows that this
value is too small.
(If these MDs are modified, the memory backup is retained)
The following applies to GUD variables:
- MD18118 $MN_MM_NUM_GUD_MODULES = max. number of GUD data blocks per area (NCK/channel) (if GD1, GD2,
GD3, GD9 are to be defined, then the value must be = 9 and not e.g. = 4).
- MD18120 $MN_MM_NUM_GUD_NAMES_NCK = max. number of all NCK global GUD variables, error number = 2 shows
that this value is too small.
- MD18130 $MN_MM_NUM_GUD_NAMES_CHAN = max. number of all channel-specific GUD variables in the channel,
error number = 2 shows that this value is too small.
- MD18150 $MN_MM_GUD_VALUES_MEM = total value memory of all GUD variables together, error number = 1 shows
that this value is too small.
Programm
continuation:
Switch control OFF - ON.
6020 Machine data have been changed - now memory %1 is reorganized
Parameters: %1 = Detailed information
Explanation: Machine data have been changed that define the NC user memory allocation. Data management has restructured the
memory in accordance with the altered machine data.
Meaning of the parameter value:
- AFS = The active file system was reconfigured. The files of the passive file system were retained.
- PFS/AFS = The passive and active file systems were reconfigured.
Via the machine data $MN_IS_AUTOMATIC_MEM_RECONFIG it is configured whether NCK configures the AFS
automatically (value=TRUE) or not (value=FALSE).
Reaction: Alarm display.
Remedy: No remedial measures are required. Any user data that are required must be input again.
Programm
continuation:
Clear alarm with the RESET key. Restart part program
SINUMERIK 808D ADVANCED alarms
5.2 NCK alarms
Diagnostics Manual
Diagnostics Manual, 06/2015, 6FC5398-6DP10-0BA2
81