
Explanation:
Reaction:
Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy:
- Measuring system (G group: 13 (G70, G71, G700, G710)) must be the same in both the leading and following channels.
Programm
continuation:
Clear alarm with the RESET key. Restart part program
61752
%[[Channel %1: ] Block %2: %]Cutting edge positions or cutting directions of the tools are different
Parameters:
%1 = Channel number
%2 = Block number, label
Explanation:
Reaction:
Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy:
- Cutting edge position and cutting direction of the tools must be the same in guide and following channel.
Programm
continuation:
Clear alarm with the RESET key. Restart part program
61753
%[[channel %1: ] block %2: %]Difference in tool radii too large
Parameters:
%1 = Channel number
%2 = Block number, label
Explanation:
Reaction:
Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy:
- Tool radii may not be greater than the finishing allowance at maximum for rough cutting.
Programm
continuation:
Clear alarm with the RESET key. Restart part program
61754
%[[channel %1: ] block %2: %]Tool radii must have same size for rough cutting
Parameters:
%1 = Channel number
%2 = Block number, label
Explanation:
Reaction:
Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy:
- Check if tool radii have the same size in guide and following channel.
Programm
continuation:
Clear alarm with the RESET key. Restart part program
61755
%[[channel %1: ] block %2: %]Plate widths are different
Parameters:
%1 = Channel number
%2 = Block number, label
Explanation:
SINUMERIK 808D ADVANCED alarms
5.3 Cycle alarms
Diagnostics Manual
478
Diagnostics Manual, 06/2015, 6FC5398-6DP10-0BA2
Содержание SINUMERIK 808D
Страница 528: ...SINUMERIK 808D ADVANCED alarms 5 6 PLC user alarms Diagnostics Manual 528 Diagnostics Manual 06 2015 6FC5398 6DP10 0BA2 ...
Страница 534: ...System responses 6 2 Cancel criteria for alarms Diagnostics Manual 534 Diagnostics Manual 06 2015 6FC5398 6DP10 0BA2 ...
Страница 560: ...Data backup 8 2 External data backup Diagnostics Manual 560 Diagnostics Manual 06 2015 6FC5398 6DP10 0BA2 ...
Страница 566: ...Appendix A Diagnostics Manual 566 Diagnostics Manual 06 2015 6FC5398 6DP10 0BA2 ...