Siemens SINUMERIK 808D, Руководство по диагностике

Страница: 447 / 566

61425 [Channel %1: ] Block %2: Parameter for measuring axis rotary axis 1 or 2 incorrect - Error code:
%4
Parameters: %1 = Channel number
%2 = Block number, label channel number
Explanation:
Remedy: Causes of error: See error code %4
A -> Rotary axis number incorrect (1 or 2)
B -> No name agreed for rotary axis 1
C -> Rotary axis vector V1xyz equals zero
D -> No name agreed for rotary axis 2
E -> Rotary axis vector V2xyz equals zero
For 840D sl - as from SW 4.7 SP1:
F VECTOR=0? -> CYCLE996 Orientation vector of the 1st rotary axis = 0
G VECTOR=0? -> CYCLE996 Orientation vector of the 2nd rotary axis = 0
1 -> CYCLE9960 Incorrect number of measurements
2 -> CYCLE9960 Max. number of measurements incorrect per axis 12
3 -> CYCLE9960 Min. number of measurements incorrect per axis 3
4(RA1) -> CYCLE9960 Measuring range rotary axis 1 too small
4(RA2) -> CYCLE9960 Measuring range rotary axis 2 too small
5(RA1) -> CYCLE9960 Measuring range rotary axis1 roo large
5(RA2) -> CYCLE9960 Measuring range rotary axis 2 too large
The measuring range of a rotary axis is permissible from 10 to 360 degrees
61426 [Channel %1: ] Block %2: Sum of the active offsets does not equal zero - Error code: %4
Parameters: %1 = Channel number
%2 = Block number, label channel number
Explanation:
Remedy: Causes of error: See error code %4
Check the overview of active offsets ($P_ACTFRAME)
Delete offsets in the rotary axes
A -> sum of the translatory offsets of geometry axes <> 0
B -> sum of the fine offsets of the geometry axes <> 0
C -> sum of the rotary components of the geometry axes <> 0
D -> sum of the translatory offsets of rotary axis 1 <> 0
E -> sum of the translatory offsets of rotary axis 2 <> 0
61427 [Channel %1: ] Block %2: Tool data of the active workpiece probe incorrect or inactive - Error
code: %4
Parameters: %1 = Channel number
%2 = Block number, label channel number
Explanation:
Remedy: Causes of error: See error code %4
A -> Workpiece probe (or tool edge) inactive
B -> Length L1 of the workpiece probe = 0
61428 [Channel %1: ] Block %2: Error while creating log file - Error code: %4
Parameters: %1 = Channel number
%2 = Block number, label channel number
Explanation:
SINUMERIK 808D ADVANCED alarms
5.3 Cycle alarms
Diagnostics Manual
Diagnostics Manual, 06/2015, 6FC5398-6DP10-0BA2
447