
Reaction:
Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy:
Before activating the turning transformation, put the tool spindle in axis mode (with SPOS or M70).
Programm
continuation:
Clear alarm with the RESET key. Restart part program
61068
[Channel %1: ] Block %2: Cycle requires G code %4
Parameters:
%1 = Channel number
%2 = Block number, label
Explanation:
An incorrect G code is active when the cycle is called.
Reaction:
Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy:
Activate the stated G code before calling the cycle. Multiple G codes may be presented for selection.
Example: Cycle requires G code: G70/G71
Programm
continuation:
Clear alarm with the RESET key. Restart part program
61069
[Channel %1: ] Block %2: Axis not referenced %4
Parameters:
%1 = Channel number
%2 = Block number, label
Explanation:
A referenced axis is required in the cycle, but an unreferenced axis was detected.
If possible, the axis identifier is stated in the alarm text.
Reaction:
Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy:
Reference axis before calling the cycle.
Programm
continuation:
Clear alarm with the RESET key. Restart part program
61070
[Channel %1: ] Block %2: Incorrect tool type for "shank" selection
Parameters:
%1 = Channel number
%2 = Block number, label
Explanation:
For the "shank" selection, the tool must have an acute angle.
Reaction:
Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy:
Use "tip" selection.
Programm
continuation:
Clear alarm with the RESET key. Restart part program
61098
[Channel %1: ] Block %2: %4
Parameters:
%1 = Channel number
%2 = Block number, label
SINUMERIK 808D ADVANCED alarms
5.3 Cycle alarms
Diagnostics Manual
380
Diagnostics Manual, 06/2015, 6FC5398-6DP10-0BA2
Содержание SINUMERIK 808D
Страница 528: ...SINUMERIK 808D ADVANCED alarms 5 6 PLC user alarms Diagnostics Manual 528 Diagnostics Manual 06 2015 6FC5398 6DP10 0BA2 ...
Страница 534: ...System responses 6 2 Cancel criteria for alarms Diagnostics Manual 534 Diagnostics Manual 06 2015 6FC5398 6DP10 0BA2 ...
Страница 560: ...Data backup 8 2 External data backup Diagnostics Manual 560 Diagnostics Manual 06 2015 6FC5398 6DP10 0BA2 ...
Страница 566: ...Appendix A Diagnostics Manual 566 Diagnostics Manual 06 2015 6FC5398 6DP10 0BA2 ...