Siemens HydroRanger 200 HMI, Руководство по эксплуатации

Страница: 329 / 404

Communications
C.9 SIMATIC Process Device Manager (PDM)
HydroRanger 200 HMI
Operating Instructions, 06/2018, A5E36281317-AC
327
C.9 SIMATIC Process Device Manager (PDM)
SIMATIC PDM is a software package for parameterizing, commissioning, diagnosing and
maintaining process devices. For this device, SIMATIC PDM connects directly to the unit
using Modbus over Port 1 (the RJ-11 jack) or Port 2 (RS-485 on the terminal block).
The device comes with Port 1 (the RJ-11 jack) set for communications to SIMATIC PDM.
SIMATIC PDM contains a simple process monitor of the process values, alarms and status
signals of the device. Using SIMATIC PDM, you can do the following to process device data:
● Display
● Set
● Change
● Compare
● Check the plausibility
● Manage
● Simulate
PDM must be switched from PROGRAM mode to RUN mode in order to download
parameters to the device.
More information about SIMATIC PDM is available at
www.siemens.com/processinstrumentation ( www.siemens.com/processinstrumentation ): go
to Communication and Software > Process Device Manager. Please consult the operating
instructions or online help for details on using SIMATIC PDM. An Application Guide on using
the device with PDM and Modbus is available on our website:
www.siemens.com/processinstrumentation ( www.siemens.com/processinstrumentation ).
C.9.1 Device description
To use Process Device Manager (PDM) with the device, you need the Device Description,
which will be included with new versions of PDM. You can locate the Device Description in
Device Catalog, under Sensors/Level/ Echo/Siemens Milltronics. If you do not see the device
description for this device under Siemens Milltronics, you can download it from our website:
www.siemens.com/processinstrumentation ( www.siemens.com/processinstrumentation ). Go
to the device product page and click Downloads.