Siemens ARCADIS Varic Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 476

Siemens ARCADIS Varic Скачать руководство пользователя страница 59

System Description

ARCADIS Varic
SPR2-310.620.30.02.02

13

of 44

C-arm movements

0

The C-arm can be adjusted in height by motor control.

The horizontal movement, swivel movement, angulation and orbital movement of
the C-arm are performed manually. For this, you use the C-arm handle, the I.I.
handle or the handle on the single tank.

Operating the brakes

The levers for releasing and locking the brakes for different directions of move-
ment are marked with different colors. A graduation in the same colors for the
corresponding directions of movement is located on the housing.

Before moving the C-arm, the brake for the relevant direction of movement must
be released.

◆

Release the brake.
– You can move the C-arm.

Or

◆

Engage the brake.
– You can no longer move the C-arm.

Emergency STOP

The electronics unit of the C-arm system is provided with a red EMERGENCY
STOP button which you can use to stop motorized lifting movements immediate-
ly in a hazardous situation.

STOP

Warning

Motorized vertical movement of the C-arm.

Risk of crushing!

◆

In the case of danger, immediately press the EMERGENCY STOP button.

◆

Unlock the EMERGENCY STOP by turning it clockwise only after the hazard-
ous situation has been resolved.

«
...
57
58
59
60
61
...
»

Содержание ARCADIS Varic





























































































































































































































































































































































































































































































Отзывы:

Нет отзывов