Siemens ARCADIS Varic Скачать руководство пользователя страница 350

Страница: 350 / 476

Operator Manual

of 98

SPR2-310.620.30.02.02

Documentation

Inserting and ejecting media

To export data, you must insert a suitable CD/DVD-R in the correct drive.

Inserting the medium

CDs/DVDs can be written to on one side only.

◆

Select

Transfer > Eject from CD/DVD

– The drawer slides out.

◆

Place the CD/DVD in the drawer with the label facing up.

◆

Press the eject button on the drive.
– The drawer with the CD/DVD is retracted.

Ejecting medium from

the drive

If there is a CD/DVD in the drive, the drive slot cannot be opened using the button
on the actual slot.

◆

Always remove the CD/DVD from the drive using only in the

Transfer >

Eject from CD/DVD

menu.

– or –

◆

Click the relevant button.

Содержание ARCADIS Varic





























































































































































































































































































































































































































































































Результаты поиска

Содержание ARCADIS Varic

Отзывы:

Siemens ARCADIS Varic, Руководство оператора, Страница: 350 / 476

Результаты поиска

Содержание ARCADIS Varic

Отзывы: