manualshive.com logo in svg

Siemens ARCADIS Varic, Руководство оператора, Страница: 337 / 476

Поделиться
Скачать
Siemens ARCADIS Varic Скачать руководство пользователя страница 337

Documentation

ARCADIS Varic
SPR2-310.620.30.02.02

57 

of 98

Selecting the image

arrangement

◆

Activate the 

vertical

 option.

– The images are arranged on the film sheet one after the other from top to 

bottom.

Or

◆

Activate the 

horizontal

 option.

– The images are arranged one after the other from left to right.

Creating series with

copy on film sheet

When transferring a series to the virtual film sheet, you can have a copy generat-
ed automatically and then process the copy before filming or printing.

◆

Click the 

Copy series

 option.

– Copies of the series are generated.

◆

Activate the 

Interleaved

 option.

– The copied series is inserted.

Or

◆

Activate the 

Appended

 option.

– The copied series is appended to the end.

Selecting the display

◆

Activate the 

Keep visible part

 option.

– The image is displayed in the segment with maximum size, without being 

cropped. This is the default.

Or

◆

Activate the 

Original Image

 option.

– The image is displayed in its original size. Depending on the original size, 

the image might be cropped or displayed too small in the segment.

Or

◆

Activate the 

Clip document

 option.

– The image is enlarged so that it fills the entire segment. The overlapping 

edges are cropped accordingly.

Содержание ARCADIS Varic





























































































































































































































































































































































































































































































Отзывы:

Нет отзывов