Siemens ARCADIS Varic Скачать руководство пользователя страница 233

Страница: 233 / 476

Image Processing

ARCADIS Varic
SPR2-310.620.30.02.02

of 78

Limiting the playback

range

The bar display labels the images of the scene with bars. The left and right bor-
ders show the first and last image of the playback range.

◆

Drag the border bar to the first and last image of the desired playback range.

Starting movie mode

In movie mode the images of one series are displayed in a loop. After the last
image of the series, the first image is displayed again etc.

Movie mode cannot be started in the following situation (the button

Start Movie

Real Time

does not react): three patients are loaded in

Viewing

, a fourth patient

is being registered and a scene (multiframe object) is being recorded.

You have the following possibilities to optimize movie display and set the speed
according to your requirements:

❏

slowly

❏

real time

❏

fast

◆

Select

Scroll > Realtime Movie

or click the button.

– The film is started with the original frame rate.

◆

Select

Scroll > Movie at half frame rate

or click the button.

– The movie is started with half the frame rate.

◆

Select

Scroll > Movie at double frame rate

or click the button.

– The movie is started with double the frame rate.

The playback speed may be reduced by postprocessing activities, edge enhance-
ment or subtraction.

Содержание ARCADIS Varic





























































































































































































































































































































































































































































































Результаты поиска

Содержание ARCADIS Varic

Отзывы:

Siemens ARCADIS Varic, Руководство оператора, Страница: 233 / 476

Результаты поиска

Содержание ARCADIS Varic

Отзывы: