Siemens ARCADIS Varic Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 476

Siemens ARCADIS Varic Скачать руководство пользователя страница 42

Operator Manual

24

of 28

SPR2-310.620.30.02.02

Safety

Installation, repair

0

Modifications or upgrades to the system must comply with federal or local regu-
lations as well as generally recognized engineering standards.

As the manufacturer, Siemens cannot accept responsibility for the safety fea-
tures and for the reliability and performance of the equipment if:

❏

the product is used in a manner other than that specified in the Operator
Manual;

❏

installation, upgrades, readjustments, modifications or repairs are performed
by personnel not authorized by Siemens;

❏

components affecting safe operation of the product are not replaced by origi-
nal spare parts in the event of a malfunction,

❏

the electrical wiring in the room containing the system does not meet the
specifications of DIN VDE 0107 or the corresponding local regulations.

If desired, we will provide the technical documentation for the product. However,
this does not imply authorization to undertake repairs.

We cannot be held responsible for repairs made without our express written
approval.

When any work is performed on the product, we would recommend that you ob-
tain a certificate indicating the nature and scope of the work performed. The cer-
tificate should include any changes in rated parameters or operating ranges as
well as the date, the name of the company and a signature.

Original accessories

0

For safety reasons, only approved original accessories or non-Siemens accesso-
ries approved by Siemens AG, Medical Solutions may be used for this product.

The operator is liable for any risks associated with the use of accessories not ap-
proved by Siemens.

«
...
40
41
42
43
44
...
»

Содержание ARCADIS Varic





























































































































































































































































































































































































































































































Отзывы:

Нет отзывов