Siemens ARCADIS Varic Скачать руководство пользователя страница 275

Страница: 275 / 476

Image Processing

ARCADIS Varic
SPR2-310.620.30.02.02

of 78

Creating annotation texts

Texts that are often used can be created on the

Annotation

card. You can also

delete texts or change existing annotations. The created texts may not exceed
one line and 50 characters.

The entered texts are available for selection, if you have enabled the

Tools >

Annotate

function in the

Viewing

task card and then click into the image with

the right mouse button.

Creating a new text

◆

Click the

Annotation

card into the foreground.

◆

Click on the

Paste

button.

◆

Double-click the empty box.

◆

Enter the new text.

◆

Click on the

Paste

button or press the

Enter

-key.

– The new annotation text is placed in the top position of the list.

Содержание ARCADIS Varic





























































































































































































































































































































































































































































































Результаты поиска

Содержание ARCADIS Varic

Отзывы:

Siemens ARCADIS Varic, Руководство оператора, Страница: 275 / 476

Результаты поиска

Содержание ARCADIS Varic

Отзывы: