Siemens ARCADIS Varic Скачать руководство пользователя страница 473

Страница: 473 / 476

Options

ARCADIS Varic
SPR2-310.620.30.02.02

of 24

Exposure grid

An exposure grid measuring the same as the cassette format can be inserted into
the cassette holder with the cassette.

The exposure grid is delivered with the cassette holder.

◆

Always insert the exposure grid up to the end stop in the cassette holder.

Attaching the cassette holder

Caution

Springs or pins not correctly attached.

Risk of injury if cassette holder becomes loose!

◆

Make sure the springs and pins (3) are securely locked in place.

◆

Ensure that both centering pins sit in the recesses.

Содержание ARCADIS Varic





























































































































































































































































































































































































































































































Результаты поиска

Содержание ARCADIS Varic

Отзывы:

Siemens ARCADIS Varic, Руководство оператора, Страница: 473 / 476

Результаты поиска

Содержание ARCADIS Varic

Отзывы: