manualshive.com logo in svg

Siemens ARCADIS Varic, Руководство оператора, Страница: 440 / 476

Поделиться
Скачать
Siemens ARCADIS Varic Скачать руководство пользователя страница 440

Operator Manual

4 

of 16

SPR2-310.620.30.02.02

Maintenance

Checking the EMERGENCY STOP function for motor-driven 
system movements

0

◆

Switch the ARCADIS Varic on.

◆

Move the lifting column and press the 

EMERGENCY STOP

 button at the 

same time.
– The lifting movement is stopped.
– A message is displayed on the monitor indicating that EMERGENCY STOP 

has been actuated.

◆

Unlock the 

EMERGENCY STOP

 button again.

◆

Press one of the keys for moving the lifting column.
– The lifting movement is enabled again.

Maintenance plan for checking the system

0

The tests and inspections required by national laws or regulations, such as 
DHHS regulations or RöV (constancy tests), are not part of the activities listed in 
this maintenance plan. 

If national laws or regulations specify more frequent checking and/or mainte-
nance, this must be observed.

Maintenance work should be performed by trained technical personnel only. 
To keep the system in an optimum condition, we recommend that you conclude 
a maintenance contract. In the case of questions relating to maintenance/mainte-
nance contract please contact our Siemens Customer Service.

Please observe the relevant information in 
(

→

Register 2: Safety, Page 5).

Checking the system

The stated functions are minimum requirements.

Procedures to be performed

Function

Interval

Mechanical safety

Damage to the housing, system movements and 
options (e.g. spacer)

12 months

Electrical safety

Ground conductor, grounding strap on the C-arm sys-
tem, cables and plugs

12 months

Functional check

Emergency stop and lifting column

12 months

Image quality

Image display and image processing

12 months

Содержание ARCADIS Varic





























































































































































































































































































































































































































































































Отзывы:

Нет отзывов