manualshive.com logo in svg

Siemens ARCADIS Varic, Руководство оператора, Страница: 465 / 476

Поделиться
Скачать
Siemens ARCADIS Varic Скачать руководство пользователя страница 465

Options

ARCADIS Varic
SPR2-310.620.30.02.02

13 

of 24

Sterile cover on the C-arm

0

To protect against contamination, the C-arm including the image intensifier and 
the X-ray tube assembly is completely covered with a two-part sterile cover. 
The cover is attached with sterile clamps.

C-arm completely covered

◆

Slip the cover over the image intensifier.

Caution

Insufficient attachment of the sterile cover.

The patient can be injured if the cover falls down!

◆

When attaching the sterile cover with the clamps, make sure the cover is 
fastened properly.

Содержание ARCADIS Varic





























































































































































































































































































































































































































































































Отзывы:

Нет отзывов