Siemens ARCADIS Varic Скачать руководство пользователя страница 448

Страница: 448 / 476

Operator Manual

of 16

SPR2-310.620.30.02.02

Maintenance

Granting access

◆

Depending on the required service activities, you will assign the service engi-
neer full or limited access to your workstation:

❏

Full access

Allows the service technician to take control of your workstation (which dis-
ables it to you).

❏

Limited access

This mode provides access to all service functions that do not interfere with
regular patient operations.

❏

No access

❏

Allow patient data access

The service engineer will only have access to patient data if you give your
explicit permission upon his specific request.

Limiting access rights

As long as you have assigned full access rights to service, i.e. maintenance is in
progress, you cannot continue working with your ARCADIS Varic.

◆

Select

Limited access

No access

and confirm with

Apply

continue working.

For further information, please contact Siemens Service or your system adminis-
trator.

Warning

Aborting remote service without consultation with service engineers.

Aborting remote service cancels all service procedures and causes the
ARCADIS Varic to malfunction!

◆

Always consult with a service engineer before aborting remote service.

Содержание ARCADIS Varic





























































































































































































































































































































































































































































































Результаты поиска

Содержание ARCADIS Varic

Отзывы:

Siemens ARCADIS Varic, Руководство оператора, Страница: 448 / 476

Результаты поиска

Содержание ARCADIS Varic

Отзывы: