SICK Omni CLX 490-0010, Руководство по эксплуатации

Страница: 26 / 152

Chapter 3 Operating Instructions
Compact OMNI Scanner
3-8
© SICK AG · Division Auto Ident · Germany · All rights reserved 8 009 237/0000/07-05-2002
Product description
CLX without external parameter memory
Operating mode LED Display Function
Start Device Ready Green
•
Lights up after power-up if the self-test was successful
Subsequent behavior depends on selected start option
S
tart option: S
TART WITH EXTERNAL
P
ARAMETERS
(
DEFAULT
)
•
Lights up constantly (CLX has loaded internal parameter set)
Start option: S
TART WITH INTERNAL
P
ARAMETERS
:
•
Lights up constantly (CLX has loaded internal parameter set)
Start option: S
TART WITH
C
OPY
I
NTERN ->
E
XTERN
:
•
Blinks constantly together with the "Read Result" LED 1)
(CLX has loaded internal parameter set)
Read Result Green S
tart option: S
TART WITH
C
OPY
I
NTERN ->
E
XTERN
:
•
Blinks constantly together with the "Device Ready" LED
1)
Reading mode Device Ready Green
•
Lights up constantly
•
Extinguishes with new operating mode/function
Sensor Green
•
Lights up if reading diode is active
(The laser diode is activated/deactivated by reading pulse)
•
Lights up constantly in Free-running mode, since laser diode is always active
Read Result Green LED is linked to the "Result 2" switching output and indicates the selected result
status for the defined pulse duration of the output.
•
Lights up after a successful read (default: Good Read)
•
Lights up if the match code comparison is active, the bar code read matches the
specified match code(s) and the corresponding result status output is selected
for the "Result 2" output
Data Yellow
•
Flickers when the CLX transfers data to the host on the host interface
Percentage Sensor Green
•
Lights up constantly, as Free-running mode is active
evaluation Read Result Green Behavior depends on the reading quality:
•
Extinguishes if reading rate < 30%
•
Blinks twice a second if reading rate 30% ... 70%
•
Blinks five times a second if reading rate 70% ... 90%
•
Lights up constantly if reading rate > 90%
1) Set the start option to S
TART WITH THE INTERNAL
P
ARAMETERS
on the D
EVICE
C
ONFIGURATION
tab in the "CLV-Setup" program. Download to CLX!
Table 3-2: Meaning of LEDs: CLX without external parameter memory