SICK Omni CLX 490-0010 Скачать руководство пользователя

Страница: 63 / 152

Operating Instructions

Chapter

CLX 490

8 009 237/0000/07-05-2002

6-5

Operation

6.4

Configuring (parameterization) the CLX

The CLX adapts to the reading situation locally with the configuration. The read, evaluation

and output characteristics can, therefore, be parameterized as required on the basis of the

factory default settings or an application-specific CLX parameter set that has already been

created.

The CLX supports two different configuration methods:

•

Configuration via the "CLV-Setup" program

(parameter values are set via the serial interface)

•

Configuration via command strings

(parameter values are set via the serial interface)

See

Chapter 10.7 Configuring a CLX with command strings, Page 10-23

In the Parameterization mode, the CLX outputs no reading result.

6.4.1

Configuring the CLX via the user interface of CLV-Setup

To be able to use CLV-Setup, a PC has to be connected and the program installed on it. The

procedure for connecting the PC to the CLX is described in

Chapter 5.5.6 Connecting the

PC, Page 5-15

. The procedures for installing and starting the "CLV-Setup" program and for

starting and operating the user interface are described in the Appendix (

Chapter 10.6 In-

stalling and operating the "CLV-Setup" program, Page 10-15

Transferring a parameter set between CLV-Setup and the CLX

When the CLX is being parameterized, CLV-Setup runs in the offline mode. To be able to mo-

dify the current parameter set of the CLX, this first has to be loaded to CLV-Setup from the

CLX. This procedure is referred to as an

upload

(upload from CLX) during which CLV-Setup

always loads a complete copy of the current CLX parameter set. This parameter set remains

unchanged until it is overwritten by CLV-Setup. With the help of the context menu (right

mouse button), only the parameter just edited can be loaded (upload parameter) from the

CLX’s memory (RAM).

Changes made to the current parameter set in CLV-Setup do not take effect until the para-

meter set has been transferred to the CLX. CLV-Setup always sends a copy of the complete

parameter set to the CLX, i. e. all of the existing parameter values in the CLX are overwritten.

The procedure for transferring and saving the parameter values in the CLX is referred to as

download

(download to CLX). With the help of the context menu (right mouse button), only

the parameter just edited will be

temporarily

loaded (download parameter) into the CLX’s

memory (RAM).

Loading a complete CLX parameter set (upload)

Click

in the toolbar.

CLV-Setup loads the current CLX parameter set from the RAM of the CLX to its databa-

se and displays the values in the tabs.

The "Device Ready" LED is extinguished during the upload.

If the "CLV-Setup" program does not recognize parameters transferred during the upload, it

outputs a warning message. Unknown parameters can be edited in the E

XTRAS

tab by follo-

wing the conventions for command strings. When the parameter set is then saved, these

parameters are also saved.

Содержание Omni CLX 490-0010

























































































































































Результаты поиска

Содержание Omni CLX 490-0010

Отзывы:

Похожие инструкции для Omni CLX 490-0010

Бренды по названию

Популярные бренды

SICK Omni CLX 490-0010, Руководство по эксплуатации

Результаты поиска

Содержание Omni CLX 490-0010

Отзывы:

Похожие инструкции для Omni CLX 490-0010

Бренды по названию

Популярные бренды