SICK Omni CLX 490-0010, Руководство по эксплуатации

Страница: 25 / 152

Operating Instructions Chapter 3
CLX 490
8 009 237/0000/07-05-2002 © SICK AG · Division Auto Ident · Germany · All rights reserved
3-7
Product description
3.3 Indicators and control elements
3.3.1 Control elements
The CLX is operated and configured via the terminal interface (auxiliary interface) using the
CLV-Setup program or using command strings sent via the host interface/terminal interface.
A variety of parameter options allow you to adapt the device to a wide range of applications.
The following can be defined:
•
The configuration of the code types
•
The read, evaluation, and output properties
•
The communication parameters of the host interface
•
The structure of the data output string for Good Read and No Read on the host interface
•
The function of the terminal interface
Chapter 10.6 Installing and operating the "CLV-Setup" program, Page 10-15 describes the
procedure for installing the "CLV-Setup" program and explains how to use it. The parametri-
zation (configuration) procedure is explained in Chapter 6.4 Configuring (parameterization)
the CLX, Page 6-5 .
3.3.2 Function of the LEDs
Four LEDs indicate the operating status, activity of the laser diode, reading result status, and
data transfer on the host interface. The LEDs are located on the rear of the device ( Fig. 3-5 ).
If the optional external parameter memory is connected, the LEDs also indicate whether the
memory was successfully accessed.
The meaning of the LEDs in the various operating modes/functions is shown in Table 3-2,
Page 3-8 and Table 3-3, Page 3-9 .
Fig. 3-5: LEDs
Device Ready
Sensor
Read Result
Data