Sibata 080040-63 Скачать руководство пользователя страница 5

Страница: 5 / 102

1 Safety Precautions

The precautionary information in this operation manual is provided to ensure the safe use of the

product and to prevent property damage and injury to you and other people.

All of the precautionary information is important for ensuring safety. Therefore, be sure to read and

understand the information thoroughly before using the product and observe it during use.

Users (Important)

This product should only be operated by trained and experienced operators that understand the

specialized technology and dangers involved. Untrained or currently being trained operators

should only operate the product under close supervision by a person that is already trained or

has sufficient specialized experience.

This operation manual is written assuming the product will be operated by a person that

understands the risks of operating the product.

Graphical Symbols

The degree of danger involved in using the product without observing the indicated

precautionary information is indicated by one of two labels: WARNING or CAUTION. Always

observe the precautionary information indicated with these labels, which is important for

ensuring safety.

Labels Indicating Degrees of Damage or Injury

WARNING

Indicates a potentially hazardous situation which, if not

avoided, could result in serious injury or possibly death.

CAUTION

Indicates a potentially hazardous situation which, if not

avoided, may result in minor to moderate injury or

equipment damage.

Содержание 080040-63







































































































Результаты поиска

Содержание 080040-63

Отзывы:

Похожие инструкции для 080040-63

Бренды по названию

Популярные бренды

Sibata 080040-63, Руководство по эксплуатации

Результаты поиска

Содержание 080040-63

Отзывы:

Похожие инструкции для 080040-63

Бренды по названию

Популярные бренды