Shimadzu UP1023X, Инструкция по эксплуатации

Страница: 88 / 125

73
11
. Application Functions
2
4
1
3
5
6
7
11
13
12
8
9
10
14
11.7
Formulation Mode
This function is convenient for weighing in the components of a formulation. The mass of each component
is displayed and stored Every time a component is added and [PRINT] key is pressed, the mass of that
component is output through RS-232C or DATA I/O interface and the display will be automatically zeroed.
When all the components have been weighed, the masses are summed up and the total mass is displayed
and output by pressing [POWER] key.
Select menu item
51 .
(Operation)
1
When Formulation Mode is ON, the display
stands at Formulation stand-by status upon
entering the mass display. Add-on symbol,
Memory symbol and Stand-by symbol are
illuminated in the display.
Place a container (if used) and press [O/T] key to
tare the display. Note that taring with [O/T] key is
not accepted after [PRINT] key is pressed in the
following step
2
until [POWER] key is pressed in
the step
5
.
2
Press [PRINT] key. When external device is
connected, “--------- FORMULATION MODE
---------” will be output.
3
Load the first component and press [PRINT] key.
Upon stability is detected at a value higher than
five times Zero Range, the mass value will be
output with a numbering “CMP001 =”. The
display will be automatically zeroed after that.
4
Repeat step
3
until all the components have
been weighed.
5
Press [POWER] key.
The total mass will be displayed and output to
external devices with a remark “TOTAL =”.
The balance will return to the formulation mode
standby state.
6
Clear the pan.
Start the next set of measurements from the
step
1
.
--FORMULATION MODE--
CMP001 =
0.536g
CMP002 =
0.542g
CMP003 =
0.448g
TOTAL =
1.526g
Output example: 1st component is 0.5361g,
2nd is 0.5422g, 3rd is 0.4488g.