Shimadzu UP1023X, Инструкция по эксплуатации

Страница: 43 / 125

28
The built-in clock has to be set up in advance if a calibration record is to be produced or Clock-CAL
function is to be used.
5.1
Date
1
Select menu
63
, and set the last two digits of
the year, the month, and the day, in that order.
Press the [UNIT] key to increase the blinking
(selected) digit by 1.
Press the [PRINT] key to move the selection to
the next digit to the right.
Example: June 1st, 2019, set as "19.06.01"
Example: February 29th, 2020, set as “20.02.29”
2
Press the [O/T] key once the date is set. This will
record the set date.
Notes
The built-in clock will automatically compensate for leap years, however no
checks will occur when configuring settings.
When the [O/T] key is pressed in step 2, the seconds will be set to 0, so if the
date is set after the time is set, the seconds setting will be incorrect. Set the
time after setting the date.
5.2
Date Output Style
When outputting the date from the balance built-in clock to an external device, the date to be output can
be selected from three different styles of day, month, and year order. The order will not change when
displaying the date on the balance.
To output in the YYYY-MM-DD order, select menu item
63a
. [y.m.d]
To output in the DD-MM-YYYY order, select menu item
63b
. [d.m.y]
To output in the MM-DD-YYYY order, select menu item 63c . [m.d.y]
Notes
The setting made here on “Date Output Style” will not be cleared with Menu
reset (See
4.5.2 ).
(Example)
5.
Built-in Clock Set-up