54
10
. Enhancing Productivity
Note
During continuous output, the Communication symbol may appear to
remain lit. If the transfer speed of the data output is slow, the display may
become unstable. Increase the transfer speed as much as possible and set
the handshake off.
Print on “GO” judge of checkweighing:
Select menu item
47
[on Go]
When the checkweighing function is used and stability is detected in the “GO”
range, the data is output once. The next data output is executed after the
displayed value is within the Zero Range.
Notes
• For automatic outputs at preset intervals, see
“11.4
”.
• Pretaring Value (
10.7
) function cannot be used with Auto Print functions.
• Auto Print mode setting can be cleared without menu operation, by
pressing the [POWER] key for about three seconds.
• Not more than one of these seven functions can be set at a time. Setting
the second one with the menu will automatically clear the previously set
function; Auto Print(
10.3
), Auto Zero(
10.4
), Peak Hold(
11.3
), Interval
Timer(
11.4
), Add-on mode(
11.5
), Animal Weighing mode(
11.6
), Formulation
mode(
11.7
).
• When minimum display has been switched to 10d (See
6.2
), the optimized
Zero Range for 1d display may cause failure in the operation (e.g. Data is
not automatically output as sample is loaded). Select optimal Zero Range
value again when minimum display has been changed (See
10.5
for
details).
Содержание UP1023X
Страница 3: ...No text...
Страница 124: ...109 2 4 1 3 5 6 7 11 13 12 8 9 10 14 Appendices...
