Shimadzu UP1023X, Инструкция по эксплуатации

Страница: 30 / 125

15
2
. Installation
2
4
1
3
5
6
7
11
13
12
8
9
10
14
2.4
Turning on the Power
1
Insert the AC adapter plug into the DC IN
connector on the back of the balance.
2
Insert the AC adapter into the power source.
The balance self-check is activated and the
following messages are displayed in the order
indicated.
First, the software version number is displayed.
(Balance self-check display)
[5.00:00]
→ [CHE 5] → [CHE 4] →
[CHE 3]
→ [CHE 2] → [CHE 1] → [CHE 0] → prompting all
the symbols and segments → [oFF]
* e.g. of the version number
([CHE 5] and [CHE 4] are not displayed for the
UPY Series)
3
Press [POWER] key.
All the symbols and segments prompt and then
the display changes to indicate the gram-display.
The backlight is illuminated.
Note
If display all mode (
→
14.4) is selected, the balance will stop in the display all
state.
Press the [O/T] key afterwards to switch to g display.
*
The actual AC adapter shape may be different.