manualshive.com logo in svg

Shimadzu UP1023X, Инструкция по эксплуатации

Поделиться
Скачать
Shimadzu UP1023X Скачать руководство пользователя страница 5

II

Foreword 

 

Notation Conventions Used within the Instruction Manual 

The instruction manual uses the following notation conventions in accordance with the degree of risk and 
damage to equipment. 

Notation

Description

!

   Caution

Indicates a potentially hazardous situation which, if not avoided, 
may result in minor to moderate injury or equipment damage.

   Note

Provides additional information needed to properly use the 
balance.

Descriptions of the other pictograms used within the instruction manual are listed below. 

Pictogram

Description

Prohibitions

Indicates an action that must NOT be performed

Instructions

Indicates an action that must be performed.

The functions available for use and the selectable items differ in accordance with the model with the UP 
Series. Read the sections concerning the model in use. 

Other conventions used in this manual include:

1

, 

2

, 

3

, …

Indicates the step number in a procedure

[POWER] key

Indicates the operation key on the balance.

[E-CAL ] etc...

Items displayed on the balance display are shown in [ ] brackets. 
This also includes displayed items when selecting a menu item and is also used to identify 
menu items.

mass display

Indicates that the balance is in the weighing mode and mass is displayed in one of the 
weighing units.

Mass display

Indicates that the balance display is in one of the mass units and that the value displayed will 
change according to the load on the pan. 

1

Indicates the menu item to be selected.
In the number of the menu item on the Menu Map. See 

A-2 “Menu Map”

.

Содержание UP1023X






























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды