Shimadzu UP1023X, Инструкция по эксплуатации

Страница: 67 / 125

52
10
. Enhancing Productivity
10.2
Piece Counting (PCS)
1
Set up the PCS with menu item
57
if it is not set.
(The PCS unit is set before shipment.)
2
Press the [UNIT] key several times in the mass
display until the PCS is displayed.
3
Load the container and press the [O/T] key to
tare the balance.
4
Count exactly five pieces (or 10, 20, 50, 100, or
200 pieces) of sample to be measured and load
them on the pan.
5
Press the [CAL] key.
6
Every time the [CAL] key is pressed, the display
sequentially changes as “Ld 5pcs” ....“Ld
200pcs”, “Ld 5pcs”...
Press the [O/T] key when the display is
equivalent to the number of loaded pieces.
Example: If 50 pieces are loaded, press the [O/T]
key when “Ld 50pcs” is displayed.
This determines the unit weight or
average weight per piece.
As sample is added or removed, the
piece count (number of pieces) is
displayed.
Note
When the sample for which piece counting is to be carried out is changed
(also when the production lot changes in some cases), it is necessary to
reconfigure the unit weight settings (3 to 6 above).
Piece Count Menu Display at Next Setting
In this example, when the [CAL] key is pressed in the next PCS menu, display starts from “Ld 50pcs”.
(Example)