Shimadzu UP1023X, Инструкция по эксплуатации

Страница: 12 / 125

IX
Safety Precautions
Aftercare Services and Part Supply Period
1. Aftercare Service
In the event of the product not operating normally, carry out inspections and resolve the problem in
accordance with the instructions providing in [14.Errors and Recovery] ( P.91). If the problem persists or
other problems that are thought to be malfunctions not covered by the instructions provided arise, contact
the numbers provided on the back cover.
2. Part Supply Period
The period during which replacement parts will be supply for the product is up until seven years after the
termination of manufacture.
Note that there are cases in which it will not be possible to supply replacement parts once this supply
period has elapsed. However, the supply periods stipulated separately by the manufacturers will be
applied for parts not manufactured by Shimadzu.
Inspections and Maintenance
Daily inspections, Periodic inspections and regular calibrations are required to ensure that the
performance of the balance is maintained for long periods of time so that correct measurement data can
be acquired.
• See [Chapter 13. Maintenance/Inspections] for details on daily inspections and part replacement.
• Contact a Shimadzu sales office or service agency, or one of Shimadzu’s service companies to request
Periodic inspections and regular calibrations.
Product Disposal
When disposing of the product, dismantle and dispose of the parts separately in accordance with their
composition in order in consideration of environmental conservation.
Direct all inquiries to the contact numbers provided on the back cover.