Shimadzu UP1023X, Инструкция по эксплуатации

Страница: 66 / 125

51
10
. Enhancing Productivity
2
4
1
3
5
6
7
11
13
12
8
9
10
14
The threshold value to be set and the display count value are compared and then HI, GO, LO are
displayed.
When [UPPEr ] < Display count value HI
When [LowEr ] ≤ Display count value ≤ [UPPEr ] GO
When display count value < [LowEr ] LO
10.1.3
Target Mode
This mode is useful for constant amount weighing of liquid or judgment of excess and shortage. The target
will be indicated as the center line in the analog display. The limits will be indicated as triangle marks. A
moving bar represents the current weight on the pan.
1
Select the Target mode with menu item
12
2
Set the “target” value, which corresponds to the
center line of the graphic display, with menu item
13
[tArGEt]
Refer to 4.4 for numerical value settings.
3
Set the “limit” value, which corresponds to the
distance between the center line and upper or
lower triangle marks, with menu item
14
[L im it]
All are set by the number of display counts for
units measured. For types where 200 g is
displayed as 200.00 g, the target value would be
set as 20000.
Without load With a load within the limit
range
(Display examples in use)
←
(target)
→