1-7
In
tr
o
duc
tion
Precautions Concerning Vehicle Use
It is the user’s responsibility to verify if local laws
permit the use of a handset in a vehicle. Give full
attention to driving. Pull off onto the side of a road and
park the car before making or answering a call.
If local laws permit, we recommend that you use your
handset with the attached hands free.
Use of your handset’s function may interfere with the
vehicle’s electronic systems, such as the ABS antilock
brakes or the air-bag. To ensure no such problem
occurs, please check with your dealer or car
manufacturer before connecting your handset.
Only allow qualified service maintenance personnel to
install the vehicle accessories. The manufacturer
disclaims any liability for damage which may result as
a consequence of improper use or use contrary to the
instructions contained herein.
SAR
Your handset has been designed, manufactured and
tested so as not to exceed the limits for exposure to
electromagnetic fields recommended by the Council of
the European Union. These limits are part of
comprehensive guidelines developed by independent
scientific organisations. The guidelines include a
substantial safety margin designed to assure the safety of
the handset user and others and to take into account
variations in age and health, individual sensitivities and
environmental conditions. European standards provide
for the amount of radio frequency electromagnetic energy
absorbed by the body when using a handset to be
measured by reference to the Specific Absorption Rate
(SAR). The SAR limit for the general public is currently 2
watts per kilogram averaged over 10 grams of body
tissue. Your handset SAR value is 0.327 watts per
kilogram.
This has been tested to ensure that this limit is not
exceeded even when the handset is operating at its
highest certified power. In use however your handset may
operate at less than full power because it is designed to
use only sufficient power to communicate with the
network.
FCC Declaration of conformity
Triple-band phone: TM100 with USB cable(CE-UC30)
and AC charger(CE-EA32)
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Responsible Party:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430
TEL:1-800-BE-SHARP
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
