6-27
Basi
c Han
d
set
O
p
erati
o
n
s
Basic Handset Operations
This section describes basic phone call functions.
Confirm that the handset is on.
Making a Call
1
Slide open the handset and enter a phone
number with the keypad.
When entering a number, start with the area code.
2
Confirm the number and press
D
.
Start talking when the connection is established.
If you enter a wrong number
Press
A
[Clear] to delete one digit. Press
A
[Clear]
and hold for approximately 2 seconds to delete all digits
and return to standby mode.
Ending a Call
Press
F
to end the call.
The estimated total time for the call appears.
Answering a Call
1
The handset rings and the Indicator LED flashes
for an incoming call.
2
Press
D
,
B
or
C
[Answer].
The call is connected and “
” appears.
When the Any Key Answer Function
is Activated
To answer a call, press any key except
F
or
A
. For
information on “Any Key Answer,” refer to “Setting Any
Key Answer” on page 15-133.
When the hands free EARphone &
MIC is connected
To answer a call, press and hold the button of the hands
free EARphone & MIC for approximately 2 seconds.
Sliding close the handset also ends a call.
