11-67
Usi
n
g
th
e M
essag
e S
e
rvi
c
e
Adding the Subject of the Message
(for MMS and E-mail messaging
only)
1
After entering a message, press
B
.
2
Press
a
or
b
to highlight “Subject” and press
B
.
3
Enter the subject of the message and press
B
.
Sending the Message
1
After you have entered the message and
subject, press
B
.
2
Press
a
or
b
to highlight “Send” and press
B
.
The handset starts to send the message. After
sending the message, the message is listed in the
“Sent” box.
If you wish to save the message to the “Drafts” box,
select “Save to Drafts” instead of pressing
B
.
To add recipients
1
After entering a message, press
B
.
2
Press
a
or
b
to highlight “Add contact” and
press
B
.
3
Press
a
or
b
to highlight “To,” “Cc,” or “Bcc”
and press
B
.
If you are sending SMS, you can select “To:” only.
If you are sending MMS, you cannot select “Bcc.”
4
Enter the phone number or E-mail address of the
additional recipient and press
B
.
If you are sending MMS, you can select a phone
number from the list.
5
When adding recipients is complete, press
A
[Back].
You can enter up to 40 characters as the subject.
It may be limited depending on your network
service. Contact your service provider if you have
a problem sending mails.
In case the message cannot be sent for some
reason, the message stays in the Outbox and “
”
is displayed on the standby screen.
You can enter up to 60 characters for “To,” “Cc,”
or “Bcc.” It may be limited depending on your
service provider. Contact your service provider if
you have a problem sending mails.
