Sharp MX-2610N Скачать руководство пользователя страница 733 | Manualshive

Страница: 733 / 1312

Sharp MX-2610N Скачать руководство пользователя страница 733

OPERATION GUIDE - SETTING MODES WHEN MULTIPLE TYPES OF ADDRESSES ARE INCLUDED IN A BROADCAST TRANSMISSION

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/05-033.htm[24/03/2011 3:01:40 PM]

MX-2610N / MX-3110N / MX-3610N

SETTING MODES WHEN MULTIPLE TYPES OF ADDRESSES

ARE INCLUDED IN A BROADCAST TRANSMISSION

IMAGE SEND

This section explains settings you should bear in mind if multiple types of addresses are

included in a broadcast transmission.

When a broadcast transmission includes a mix of several types of addresses (such as scan

mode and Internet Fax mode destinations), its settings are enabled for all addresses

regardless of which mode screen is used to configure them. Note the following exceptions:

Send size

When the file format is set to [TIFF-S] in Internet fax mode,

transmission is only possible in A4R (8-1/2" x 11"R) size.

If an original larger than A4 (8-1/2" x 11") is scanned, it will

automatically be reduced to A4R before transmission.

Resolution
(image)

Pages are sent using settings configured in each mode.

File format (file
compression
mode)

The compression mode set with [System Settings] → [Image Send
Settings] → [Scan Settings] → [Scan Settings] → [Compression Mode
at Broadcasting] in "Setting mode" is used for all destinations.

Colour scanning

In scan mode, if the colour mode setting is [Full Colour], the original is

sent in Mono2 to Internet fax destinations and in colour to scan

destinations.

If the facsimile expansion kit is enabled, tap the [Send Same Image

as Fax Address] key on the action panel to send the original in

Mono2.

If the Internet fax expansion kit is enabled, tap the [Send Same Image

as Fax Address] key on the action panel to send an original having

the same settings as those for the Internet fax address. (This key

cannot be used if the facsimile expansion kit is enabled.)

Original count

An address of a mode in which the number of original sheets are

specified, if it exists, is enabled.

Scan file size

If a broadcast transmission is performed that includes destinations for

which an attachment size limit has been set using [Maximum Size of

E-mail Attachments] or [Maximum Size of Data Attachments

(FTP/Desktop/Network Folder)] (in "Setting mode", select [System
Settings] → [Image Send Settings] → [Scan Settings] → [Scan
Settings] → [Compression Mode at Broadcasting]), the limit will also
apply to destinations for which a limit is not set.

2in1

This mode is available only for Fax and Internet Fax. It is linked to a

mode with an appropriate function.

«
...
731
732
733
734
735
...
»

Содержание MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов