
OPERATION GUIDE - A ONE-TOUCH INDIVIDUAL KEY OR GROUP KEY CANNOT BE EDITED OR DELETED
file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/08-013-02.htm[24/03/2011 3:05:14 PM]
MX-2610N / MX-3110N / MX-3610N
A ONE-TOUCH INDIVIDUAL KEY OR GROUP KEY CANNOT BE
EDITED OR DELETED
TROUBLESHOOTING
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the "
"position. Wait at least 10 seconds and
then turn the main power switch to the "
"position. After the main power indicator colour
changes from orange to green, press the [POWER] button.
When the background colour of the job status display at the upper right corner of
the touch panel is not grey, do not switch off the main power switch or unplug the
power plug. This may damage the hard drive or cause the data being stored or
received to be lost.
Point to check
Solution
If the key is an individual key, is the key
included in a group?
Remove the key from the group and
then edit or delete the key.
(If the key is included in multiple programs, it
must be removed from all programs.)
"Setting mode" → [Address Book]
If the key is included in multiple group keys,
print the Group List in [Sending Address List]
in the setting mode. The list will show where
the key is stored.
"Setting mode" → [System Settings] → [List
Print (User)] → [Sending Address List] →
[Group List]
Is the key being used in a reserved
transmission or a transmission in progress?
Wait until the transmission is finished
or cancel the reserved transmission
and then edit or delete the key.
Is the key included in a program key?
Remove the key from the program
and then edit or delete the key.
(If the key is included in multiple programs, it
must be removed from all programs.)
[Call Program] → [Delete] in the action panel
for each mode
If the key is included in multiple programs,
print the Program List in [Sending Address
List] in the setting mode. The list will show
where individual and group keys are stored.
"Setting mode" → [System Settings] → [List
Print (User)] → [Sending Address List] →