Sharp MX-2610N Скачать руководство пользователя страница 1065

Страница: 1065 / 1312

OPERATION GUIDE - INTERNET FAX SETTINGS

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/07-037-03.htm[24/03/2011 3:04:09 PM]

Index

Contents

seconds in increments of 30 seconds if no response is received from the mail server (POP3

server).

Reception Check Interval Setting

Specifies an interval at which the machine automatically checks the mail server (POP3 server)

for received Internet faxes. The interval can be set from 0 minutes to 8 hours in increments of

1 minute.

If 0 hours 0 minutes is specified, the machine does not automatically check the mail server for

received Internet faxes.

The machine also checks the mail server (POP3 server) for received Internet faxes

when the main power is switched on. (Except when 0 hours 0 minutes is specified.)

Fax Output Settings

This sets the output tray for received Internet faxes.

The items that appear will vary depending the machine configuration.

Allow/Reject Mail or Domain Name Setting

Allows or refuses a reception from specified addresses/domains.

Item

Description

Reject Reception

Reception from the stored address/domain is not allowed.

Allow Reception

Reception from the stored address/domain is allowed.

All Invalid

Reception from any address and domain is allowed, regardless of

whether or not any addresses or domains have been stored.

Add New

Adds a new address or domain (maximum of 50) from which

reception is to be rejected or allowed.

Enter the address/domain (maximum of 64 characters) and tap

the [Store] key.

If the first character of the entry is not "@", the entry is identified

as an address. If the first character is "@", the entry is identified

as a domain. ([email protected] is treated as an address, and

@xx.xxx.com is treated as a domain. ) Storing an address

specifies only that address. Storing a domain specifies all

addresses that include that domain.

Registered address or

domain list

Displays a list of the stored addresses and domains. An address

or domain can be deleted from the list when selected.

When there are no stored anti junk mail addresses or domains, only the [Add New]

key can be selected.

«
...
1063
1064
1065
1066
1067
...
»

Содержание MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание MX-2610N

Отзывы:

Sharp MX-2610N, Руководство пользователя, Страница: 1065 / 1312

Результаты поиска

Содержание MX-2610N

Отзывы: